The difference is in the detail. By looking at all of the individual elements of drop stitch Red Paddle Co have been able to develop a refined process to improve all aspects of board production.
Firstly the process of coating the inner thread section with molten PVC has been removed– this was a redundant process, as they had no interest in producing a single layer board which only served as a base to glue the outer/double layer to. It was also a messy process with very little control. Instead, they coat the thread structure in a layer of adhesive that has been specially formulated to create both a seal and a bonding layer. Then, a machine laminates a layer of high density structural PVC to this adhesive layer under controlled conditions. This completely removes the human factor involved in traditional double layer application.
This whole process is done at the raw material stage by carefully calibrated machinery developed for this process. The result is a consistent and high level cosmetic finish that has all of the durability and strength of the previous double layer construction. And because this process is done at the raw material stage we are now able to benefit from torsion stiffness as the material is put under tension when the board is inflated.
They have created the ultimate blend of performance, quality and weight.
Adding MSL to their TecAir manufacturing process makes all Red Paddle Co’s boards more durable and ensures they perform better. The patented RSS stiffening system adds even further rigidity when needed, making SUPs so tough that you can run a 22-tonne digger over them, no problem! And if you don’t believe us check out this video.
A Flawless Cosmetic Finish – All Red Paddle Co boards have an industry-leading cosmetic finish. No wrinkles or blemishes. The boards look cleaner and smoother and even feel better to the touch.
Lighter But Still Stable – All Red Paddle Co boards are up to 2kgs lighter than our previous double layer construction. But very importantly they are not too light. If a board is ultra-light it is more affected by wind and current while on the water. MSL boards have a reassuring lightweight feel.
Stiff At Lower Pressures – Due to the Torsion Stiffness effect all Red Paddle Co boards are stiffer at lower pressures compared to other products on the market. We recommend a pressure of between 16-22psi. Less pumping and more paddling.
Even More Durable – The multiple-layer coating of Red Paddle Co boards is tough and durable. With the third generation of MSL material now in use, the boards are more durable than ever.
To view our range of Red Paddle Boards click the link here
Get Involved